Right to work checks: a UK employer's guide (2026)

You must check that someone has the right to work in the UK before they start working for you, and keep a record of the check. There are three ways to do it: look at their original documents, check a share code online, or use a certified digital checking provider. Since 1 October 2026 the same duty also covers many workers and individual sub-contractors, not just employees. Get it right and you have a legal defence, called a statutory excuse, if the person later turns out not to have the right to work. Get it wrong and the civil penalty can reach £60,000 per worker. This guide is general information, not legal advice. Always follow the current GOV.UK guidance.
The short version
- When: before the person starts work. A check done on day two does not protect you.
- Who: everyone you take on, including British and Irish citizens. Since 1 October 2026 this includes people on a worker's contract and individual sub-contractors.
- How: a manual check of original documents, an online check with a share code, or a check through a registered digital verification service provider.
- Share codes: if someone has an eVisa, you must use the Home Office online service. You need their share code and date of birth.
- Keep records: keep a copy of the documents or the online result for as long as they work for you, plus 2 years.
- Follow-up checks: if their permission is time-limited, check again before it runs out.
- Penalties: up to £45,000 per illegal worker for a first breach, and up to £60,000 for repeat breaches within three years.
Who you must check
Check everyone, every time. Checking only people you think might be from abroad is discrimination, and it leaves you without a defence for the people you skipped.
Until recently the rules covered employees only. From 1 October 2026, section 48 of the Border Security, Asylum and Immigration Act 2025 extended them to other working arrangements. The current GOV.UK checklist covers people engaged under:
- a contract of employment,
- a worker's contract, or
- an arrangement as an individual sub-contractor.
It also covers some arrangements where workers are supplied through another business or matched through an online platform. In those cases the rules are more detailed, and the Home Office employer's guide explains who is responsible. If you use gig workers, freelancers or labour suppliers, read that guide before you assume the check is someone else's job.
The check is one step in taking someone on. Our guide to hiring your first employee covers the rest, from the minimum wage to pensions.
The three ways to check
You can choose any of the three methods. But you must not insist that a person proves their right to work in one particular way.
1. A manual check of original documents
This works for anyone who has acceptable documents, including British and Irish citizens. Biometric residence cards and permits are no longer accepted.
- Obtain the original documents. GOV.UK lists them in two groups: List A for people with a continuous right to work, and List B for time-limited permission. Do not rely on a scan, a screenshot or a photo sent by email.
- Check the documents with the person present, in person or by live video link. Make sure they are genuine and unchanged, and that the photos look like the person. Check that dates of birth match across documents. If names differ, ask for evidence such as a marriage certificate.
- Copy each document in a format that cannot be changed, such as a PDF. For a passport, copy the pages with the photo, personal details and expiry date, plus any visa or endorsement. Do not just copy the front cover.
- Record the date you did the check. Writing a date on the copy on its own is not enough, so keep a secure record alongside it.
A British or Irish citizen's passport can be current or expired. A clipped passport, which has been cancelled, is not acceptable.
2. An online check with a share code
This is for people from outside the UK and Ireland, most of whom now hold an eVisa rather than a physical document. Where someone has an eVisa, you must use this route. British and Irish citizens cannot get a share code.
- Ask for a share code. It must be a right to work share code: one made for renting a home will not work. Citizens Advice says a share code can be used for 90 days.
- Enter the share code and their date of birth into the GOV.UK service "Check a job applicant's right to work".
- Check the photo on the result matches the person in front of you, in person or on a video call.
- Read the result. It shows what type of work they can do and, if their permission is time-limited, when it ends. Make sure the job fits.
- Save the profile page as a PDF or HTML file, and record the date of the check.
You do not need to see their documents as well.
3. A digital check through a provider
You can pay a certified digital verification service provider to check documents for you. GOV.UK calls these right to work digital verification service providers. You may also see them called identity service providers, using identity document validation technology (IDVT).
- The provider must be registered with the Office for Digital Identities and Attributes.
- They can check valid British and Irish passports, including Irish passport cards.
- Their output must show the person's name, date of birth, document image, photo, the date of the check and the provider's name. Keep it.
- Using a provider is optional. It is a convenience, not a requirement.
You are still the one responsible for the check, even if a provider does part of it.
If the person cannot show you anything
Some people have the right to work but cannot prove it in the usual way. For example, they may have an application or appeal still waiting with the Home Office. In that case ask the Home Office through the Employer Checking Service. If the answer is positive, you get a Positive Verification Notice. Keep it.
What to keep, and for how long
Keep a copy of the documents, the online profile page or the provider's output, and a record of the date of the check. Keep it for as long as the person works for you, and for 2 years after they leave. Then destroy it securely. These are personal records, so store them in line with data protection law.
Follow-up checks for time-limited permission
Some people have a continuous right to work. Others have permission that ends on a set date. The type of document decides whether you need to check again:
- List A documents show a continuous right to work, such as a British passport. No follow-up check is needed.
- List B Group 1 documents cover time-limited permission. Your protection lasts until the permission expires, so check again before that date.
- List B Group 2 documents, such as a Positive Verification Notice, protect you for six months. Check again before the six months are up.
Put the follow-up date in a diary or your HR system on the day you do the first check. A missed follow-up is one of the easiest ways to lose your defence.
Penalties
If you employ someone who does not have the right to work, and you did not do a correct check, the Home Office can issue a civil penalty. Since 13 February 2024 the maximum penalties have been:
- £45,000 per illegal worker for a first breach
- £60,000 per illegal worker for repeat breaches within three years
You will not have to pay if you can show you did the correct checks. Knowingly employing someone without the right to work, or having reasonable cause to believe they did not have it, is a crime. It can mean up to 5 years in prison and an unlimited fine.
Common mistakes
- Checking after the person has started. The check must happen before work begins.
- Only checking some people. Check everyone, including British citizens. Picking people by accent or name is discrimination.
- Accepting a photo or scan of a document instead of the original, for a manual check.
- Accepting a biometric residence permit or card. These no longer prove right to work. Ask for a share code instead.
- Using the wrong share code, such as one made for renting.
- Not recording the date of the check, or only writing it on the copy.
- Forgetting follow-up checks for people with time-limited permission.
- Assuming an agency or platform did the check for workers you engage through them. Since 1 October 2026 the rules for these arrangements have changed, so confirm who is responsible.
How we can help
Pulsare's recruitment team helps businesses fill roles from start to finish. That covers understanding the role, searching for and screening candidates, shortlisting, and interview support, through to the offer and onboarding. We mainly fill roles in the financial sector, such as compliance officers, and also help companies find medical and construction staff. We can help with a one-off vacancy or ongoing hiring.
Once someone is hired, our outsourced payroll service, including PAYE and CIS, makes sure new starters are set up correctly. Services are delivered directly by Pulsare or by trusted specialists we call Pulsare Partners.
We do not give legal advice. The right to work check stays your responsibility as the employer, and you should follow the GOV.UK guidance. Call us on 020 3916 6243 or talk to our recruitment team.
Questions people ask
How do I check someone's right to work with a share code?
Ask them for their right to work share code and date of birth. Enter both into the GOV.UK "Check a job applicant's right to work" service, check the photo matches them, and save the profile page with the date of the check.
Do I need to do a right to work check on British citizens?
Yes. Check everyone before they start. British and Irish citizens cannot get a share code, so check their passport (current or expired) or other original documents, or use a registered digital provider.
How long is a right to work share code valid for?
Citizens Advice says a share code can be used for 90 days. It must be a right to work share code: one made for another purpose, such as renting, will not work.
Can I accept a biometric residence permit as proof of right to work?
No. Biometric residence cards and permits are no longer accepted. Ask the person for a right to work share code instead.
What is the fine for not doing a right to work check?
If you employ someone without the right to work and did not do a correct check, the civil penalty can be up to £45,000 per worker for a first breach, and up to £60,000 per worker for repeat breaches within three years.
Do I need to check self-employed contractors?
Since 1 October 2026, the duty covers individual sub-contractors and people on a worker's contract, not just employees. Some platform and labour supply arrangements are covered too. Read the Home Office employer's guide to see where your arrangements fit.
Sources
All checked 3 November 2026.
- GOV.UK: checking a job applicant's right to work
- GOV.UK: employers' right to work checklist (updated 1 October 2026)
- GOV.UK: employer's guide to right to work checks (1 October 2026 version listed)
- GOV.UK: check a job applicant's right to work (share code service)
- GOV.UK: penalties for employing illegal workers
- GOV.UK: employee immigration status checks (Employer Checking Service)
- Legislation.gov.uk: explanatory memorandum to the Immigration (Employment of Adults Subject to Immigration Control) (Maximum Penalty) (Amendment) Order 2024
- LawPlayer: the Border Security, Asylum and Immigration Act 2025 (Commencement No. 4) Regulations 2026
- Capsticks: right to work checks to expand beyond employees on 1 October 2026 (13 July 2026)
- Lewis Silkin: expanded illegal working regime and the draft employer's guide (23 July 2026)
- Citizens Advice: check how to prove your right to work in the UK

